ARCHIPELAGO
Lighting Group
FIELD-SET
4-WATTselect dip-set · 100 / 80 / 60 / 40 % ·
2-CCTselect dip-set · 4000K / 5000K ·
3 ordered optics general / aisle / narrow ·
contrⒶLS-Ready integral sensor receptacle
ARCHIPELAGO
Lighting Group
Electrical & Optical
| Input voltage | 120–277V (27VA5) · 347–480V (48VA5) |
| Dimming | 0–10V, 100 % to 10 % |
| Power factor / THD | PF >0.9 · THD <20 % |
| Surge protection | 6 kV / 3 kA, on the driver board |
| CRI | >80 |
| CCTselect | 4000K / 5000K · dip-set at install · not encoded in the catalog number |
| WATTselect | Four steps at 100 / 80 / 60 / 40 % · dip-set at install · not encoded in the catalog number |
Construction & Environment
| Housing | One-piece die-cast aluminium, prismatic diffuser |
| Thermal | Driver compartment separated from the LED board; convection cooled |
| Operating ambient | −40 °F to 122 °F |
| Location listing | UL Listed damp location — not wet rated |
| Lifetime | L70 at 50,000 hr per LM-80 / TM-21 |
| Warranty | 5-year / 50,000-hour limited |
ARCHIPELAGO
Lighting Group
Every catalog number & its availability
Availability is the fixture only. Adding an emergency driver or a sensor makes the order line a Workbench build.
CCT is dip-set on every catalog number and never changes availability.
Presetting WATTselect or CCTselect at the factory is a Workbench build and carries a service fee.
Accessories — ordered separately
| LLHB-A5/JBX/EM16/160 | 16W UL 924 emergency driver + J-box · 160W class · 90 min |
| LLHB-A5/JBX/EM25/410 | 25W UL 924 emergency driver + J-box · 250–410W · 90 min |
| PIR · Microwave · Bluetooth | Plug-and-play head, 12–24VDC, IP20, UL |
| LLHB-A5/SPM | Aircraft cable suspension kit |
| LLHB-A5/PDM300 · /PDM410 | Conduit pendant kit |
| LLHB-A5/SFM300 | Surface mount kit · 300W class and below |
| LLHB-A5/WG160 · /WG300 · /WG410 | Wire guard, one per wattage class |
ARCHIPELAGO
Lighting Group
04 · Photometrics & Dimensions
Beam angle (50 % of peak)
—
Dimensions
Check Rebate Center for DLC QPL ID — confirm the listing for your catalog number before specifying.
Full IES library: